Gates and Gates Control

For more Information please send us your Inquiry
 

Gates and Gates Control
Sluice Gate

Sluice Gate is a highly versatile flow control gate with various types of mountings. Adaptable to different applications, it can be designed to withstand  seating and unseating heads of 30 feet (9 m), 20 feet (6 m) or 10 feet (3 m) up to 60 feet. When required, it can be designed for higher water heads. The design is suitable for square, rectangular or round applications.

Channel Gate
Channel Gate is designed to control water flows in channels. It is not equipped with a top seal. The maximum allowable leakage is 0.05 GPM per foot of perimeter in seating head conditions and 0.1 GPM per foot of perimeter in unseating head conditions (head conditions taken is height of slide).

Weir Gate
Weir Gate is used to control flows in different applications by opening downwards and allowing water flow over the stainless steel plate.

Flap Gate

Flap Gate

Aufzählung

Up to 24" (610 mm) the flap is made of  a formed stainless steel plate equipped with one hinge. The seal is a neoprene strip retained on the machined frame by a stainless steel ring.
Aufzählung

Under 30" (762 mm), the flap gate design consists of a stainless steel plate reinforced with structural members. The flap is attached to the stainless steel frame by two hinge arms.

Aufzählung

Models  30" (762 mm) and over are constructed with a stainless steel frame and flap. The hinges and  arms are adjustable to control the operation sensitivity of the flap.